Nemoto & Co., Ltd - Sensor Division
Gas Sensors for Instrument Makers Worldwide
NCP-170S-H
Catalytic high-temperature pellistor flammable Gas Sensor for Industrial Environments
Specifications
Detectable Gas:
Detection range:
Voltage supply:
Current drawn:
Minimum Sensitivity:
Zero Offset (20°C):
Response time (90%):
Accuracy:
Expected lifetime:
Long Term Span Drift:
Long Term Zero Drift:
All Flammable Gases
0 – 50% LEL
2.0V +/- 0.1V
170mA +/- 20 mA
50mV / % CH4
0mV +/- 30mV
< 8 seconds
+/- 1% LEL
> 3 years
<+/- 2% FSD/ month
<+/- 0.5mV / month
Operating Conditions
Operating temperature:
Humidity range:
Pressure:
Temperature Drift (zero):
Linearity:
-40 +150°C
0 – 95% RH
0.9 – 1.1 atm
<+/- 2% LEL
Effectively linear to 0-50% LEL
General Description:
The Nemoto NCP-170S-H is a catalytic (pellistor) type flammable gas sensor supplied as a matched pair of pellistor elements mounted on a single header and protected by a metal mesh enclosure and can.
The sensor detects and measures the presence of flammable gases and vapours in air, in the range 0-60% of the Lower Explosive Limit (LEL) of the gas or vapour being measured. Very similar to the popular NCP-170S sensor, the NCP-170S-H employs a slightly different header material which allows the sensor to be used within a very wide temperature range (-40°C to +150°C).
The NCP-170S-H exhibits excellent long term zero and sensitivity stability and a high level of resistance to catalytic poisons. The highly automated manufacturing procedure employed by Nemoto results in a repeatable reliable sensor which, unlike similar devices, requires no trimming resistor to enable the detector to be matched with a compensator.
-
Measures flammability directly
-
-40 to +150°C Temperature Range
-
Highly resistant to Catalyst poisons
-
Resistant to shocks and vibration
-
Effectively Linear output to 50%LEL
-
Specific to flammable gases
-
Unaffected by Humidity
-
Very Simple circuitry
-
Very Low Long term drift